Conde ProSpray Aerosol Adhesive Spray For Sublimation & Heat Transfer

• Conde Exclusive Product
• Watch this video for a demonstration on how to use Pro Spray.
• Helps keep transfers from moving while pressing
• Prevents ghosting and tracking: Your image will be sharp, crisp, & clear
• High dispersion nozzle: Minimizes glue used per transfer (if nozzle gets clogged or the spray is no longer a fine mist, soak tip overnight in acetone to remove clog)
• CFC-free and VOC-compliant: Meets California regulations and does not contain environmentally harmful chlorofluorocarbons
• Best suited for use soft substrates: neoprene, tees, fabrics, etc.
• MSDS

Pro Spray adhesive spray is an alternative to heat tape and is best suited for fabrics and soft surfaces.
Many customers use it successfully with hard substrates, but we recommend heat tape for most hard surfaces.
This formula is made to be compliant in all 50 US states and to achieve that, the formula is more prone to nozzle stoppage issues.
It's important to follow a few basic steps for best results.

• Remember "less is more" - It only takes a quick mist to apply enough adhesive to keep the substrate in place.
• Be sure not to confuse "quick mist" with a light press of the nozzle. It's important to press the nozzle fully to open the valve all the way.
• The formula requires constant mixing during use. Shake extra well before first use, then again with each use.
• Spray the mist in the air and fan the paper through the mist. This will minimize the potential for droplets on the paper.
• Watch this video for a demonstration on how to clean a stopped up nozzle.
• Watch this video for a demonstration on how to use Pro Spray.